SNAKE-PRO Categories Mechanical Anchoring High Load Anchors Blue-Tip 2 SCREW-BOLT™ Hangermate™ Threaded Rod Hangers Blue -Tip SCREW-BOLT™ Drop-In / Wedge Anchors Tapper+™ Concrete Screws Cast In Place Anchors (CIP) EZY Reach Hollow Core Anchors Tie Down Anchors Suspension Anchors Sleeve anchors Nylon Anchoring / Plugs Vertigo™ Threaded Rod Hangers WALL-DOG™ / Universal Anchors Light Duty / Cavity Anchors Light Duty / Plastic Plug Anchors Nylon Nail-In Anchors Masonry Nails Packers - Shims Adhesive Anchoring Injection Systems Capsules Expanding Foams & Sealant Dispensing Guns Flat Cut Studs Chisel Point Studs Cleaning / Installation Equipment Internally Threaded Sleeves Sieves Forced Entry Powder Actuated Fastening Tools Powder Actuated Pins and Charges Powder Actuated Accessories Trak-It® Gas Operated Fastening Tools Trak-It® Gas Operated Pins and Fuel Cells Trak-It® Gas Operated Accessories Screw Solutions ONE-SHOT® Polycarbonate Roofing Screws Power Tool Accessories Concrete Grinding Cups Diamond Blades ETA Snake-PRO Anchor - Internally Threaded Self-Tapping Anchors The Snake Anchor is a patented internally threaded self-tapping anchor with ETA option 1 approval for cracked and uncracked concrete. It is the only ETA option 1 approved drop-in type anchor on the market. Features M8, M10 ETA Approved Complete grip over total anchor length Very small edge distances approved Up to 6 times faster installation in comparison with drop-in anchors. No hammer required Removable for temporary fixings Can be removed completely (no steel left in concrete). Can be installed closer to the edge than traditional mechanical anchors Tags: Mechanical , Wedge-Anchors , Snake , Snake-Anchor , ETA Part No. Description Minimum Embedment Depth (mm) Hole Diameter (mm) Length (mm) Internal Thread Box Qty Carton Qty SM8PRO-PWR M8 SNAKE-PRO 41 12.7 31 M8 50 500 SM10PRO-PWR M10 SNAKE-PRO 41 12.7 31 M10 50 500 SM10KIT-PWR M10 SNAKE-PRO Kit 500pcs 41 12.7 31 M10 500 SB12.7x50-PWR SDS Plus 12.7mm x 50mm Accu-Bit For M8 & M10 SNAKE-PRO 12.7 1 SSTM8-PWR Setting tool for M8 SNAKE-PRO 1 SSTM10-PWR Setting tool for M10 SNAKE-PRO 1 Download technical literature Download specification guide Currently viewing / Home / Products / Mechanical Anchoring / Drop-In / Wedge Anchors / SNAKE-PRO