Insulation Washered Fasteners Categories Mechanical Anchoring High Load Anchors Blue-Tip 2 SCREW-BOLT™ Hangermate™ Threaded Rod Hangers Blue -Tip SCREW-BOLT™ Drop-In / Wedge Anchors Tapper+™ Concrete Screws Cast In Place Anchors (CIP) EZY Reach Hollow Core Anchors Tie Down Anchors Suspension Anchors Sleeve anchors Nylon Anchoring / Plugs Vertigo™ Threaded Rod Hangers WALL-DOG™ / Universal Anchors Light Duty / Cavity Anchors Light Duty / Plastic Plug Anchors Nylon Nail-In Anchors Masonry Nails Packers - Shims Adhesive Anchoring Injection Systems Capsules Expanding Foams & Sealant Dispensing Guns Flat Cut Studs Chisel Point Studs Cleaning / Installation Equipment Internally Threaded Sleeves Sieves Forced Entry Powder Actuated Fastening Tools Powder Actuated Pins and Charges Powder Actuated Accessories Trak-It® Gas Operated Fastening Tools Trak-It® Gas Operated Pins and Fuel Cells Trak-It® Gas Operated Accessories Screw Solutions ONE-SHOT® Polycarbonate Roofing Screws Power Tool Accessories Concrete Grinding Cups Diamond Blades Insulation Washered Fasteners Insulation Washered Fasteners to secure insulation panels from 25mm to 100mm overhead. Can be used with most Low-Velocity Powder actuated tools assembled with an insulation fastener guide attached. Features Secure insulation panels from 25mm to 100mm overhead Pre assembled with Drive Pin Tags: Forced-Entry , Powder-Actuated , Drive-Pins , Insulation Fastening Part No. Description Length (mm) Pin Diameter (mm) Box Qty 50052IF25-PWR Insulation Washer 25mm with 4.5mm x 37mm Drive Pin (8mm Head) 25 4.5 300 50052IF30-PWR Insulation Washer 30mm with 4.5mm x 42mm Drive Pin (8mm Head) 30 4.5 300 50052IF35-PWR Insulation Washer 35mm with 4.5mm x 52mm Drive Pin (8mm Head) 35 4.5 300 50052IF40-PWR Insulation Washer 40mm with 4.5mm x 52mm Drive Pin (8mm Head) 40 4.5 300 50052IF50-PWR Insulation Washer 50mm with 4.5mm x 52mm Drive Pin (8mm Head) 50 4.5 300 50052IF60-GY-PWR Insulation Washer 60mm (Grey) with 4.5mm x 52mm Drive Pin (8mm Head) 60 4.5 200 50052IF75-PWR Insulation Washer 75mm with 4.5mm x 52mm Drive Pin (8mm Head) 75 4.5 200 50052IF100-PWR Insulation Washer 100mm with 4.5mm x 52mm Drive Pin (8mm Head) 100 4.5 200 Currently viewing / Home / Products / Forced Entry / Powder Actuated Accessories / Insulation Washered Fasteners