Ceiling Clip with Top Hat Categories Mechanical Anchoring High Load Anchors Blue-Tip 2 SCREW-BOLT™ Hangermate™ Threaded Rod Hangers Blue -Tip SCREW-BOLT™ Drop-In / Wedge Anchors Tapper+™ Concrete Screws Cast In Place Anchors (CIP) EZY Reach Hollow Core Anchors Tie Down Anchors Suspension Anchors Sleeve anchors Nylon Anchoring / Plugs Vertigo™ Threaded Rod Hangers WALL-DOG™ / Universal Anchors Light Duty / Cavity Anchors Light Duty / Plastic Plug Anchors Nylon Nail-In Anchors Masonry Nails Packers - Shims Adhesive Anchoring Injection Systems Capsules Expanding Foams & Sealant Dispensing Guns Flat Cut Studs Chisel Point Studs Cleaning / Installation Equipment Internally Threaded Sleeves Sieves Forced Entry Powder Actuated Fastening Tools Powder Actuated Pins and Charges Powder Actuated Accessories Trak-It® Gas Operated Fastening Tools Trak-It® Gas Operated Pins and Fuel Cells Trak-It® Gas Operated Accessories Screw Solutions ONE-SHOT® Polycarbonate Roofing Screws Power Tool Accessories Concrete Grinding Cups Diamond Blades Ceiling Clip with Top Hat 8mm Head Pin with Ceiling Clip and Top Hat for use with Powers PA3500EX and P3X Low-Velocity Powder Actuated tools Suitable ceiling and partitioning applications and wire hanging applications. Features 8mm Head Pin with Ceiling Clip and Top Hat For use with Powers PA3500EX and P3X Low-Velocity Powder Actuated tools Suitable for use in most other Low-Velocity Powder Actuated tools Tags: Forced-Entry , Powder-Actuated , Drive-Pins , Ceiling Clips Part No. Description Length (mm) Pin Diameter (mm) Head Diameter (mm) Box Qty Carton Qty 50368A-PWR Ceiling Clip with Top Hat and 3.7mm x 25mm Drive Pin (8mm Head) 25 3.7 8 100 1000 Currently viewing / Home / Products / Forced Entry / Powder Actuated Accessories / Ceiling Clip with Top Hat