8mm Drive Pin Washered With Top Hat Categories Mechanical Anchoring High Load Anchors Blue-Tip 2 SCREW-BOLT™ Hangermate™ Threaded Rod Hangers Blue -Tip SCREW-BOLT™ Drop-In / Wedge Anchors Tapper+™ Concrete Screws Cast In Place Anchors (CIP) EZY Reach Hollow Core Anchors Tie Down Anchors Suspension Anchors Sleeve anchors Nylon Anchoring / Plugs Vertigo™ Threaded Rod Hangers WALL-DOG™ / Universal Anchors Light Duty / Cavity Anchors Light Duty / Plastic Plug Anchors Nylon Nail-In Anchors Masonry Nails Packers - Shims Adhesive Anchoring Injection Systems Capsules Expanding Foams & Sealant Dispensing Guns Flat Cut Studs Chisel Point Studs Cleaning / Installation Equipment Internally Threaded Sleeves Sieves Forced Entry Powder Actuated Fastening Tools Powder Actuated Pins and Charges Powder Actuated Accessories Trak-It® Gas Operated Fastening Tools Trak-It® Gas Operated Pins and Fuel Cells Trak-It® Gas Operated Accessories Screw Solutions ONE-SHOT® Polycarbonate Roofing Screws Power Tool Accessories Concrete Grinding Cups Diamond Blades 8mm Drive Pin Washered With Top Hat 8mm Head Drive Pins for shooting into steel and concrete. To provide resistance to pullover, these pins are available with pre assembled 1.9mm x 22mm metal washers and top hat. Features Pre assembled with 1.9mm x 22mm metal washers and top hat Resistance to pullover Increased, additional bearing surface provided by the washer Tags: Forced-Entry , Powder-Actuated , Drive-Pins , Top Hat , Washered Part No. Description Length (mm) Pin Diameter (mm) Head Diameter (mm) Box Qty Carton Qty DP820W-PWR Drive Pin 3.7mm x 20mm With 22mm Washer and Top Hat (8mm Head) 20 3.7 8 100 1000 DP825W-PWR Drive Pin 3.7mm x 25mm With 22mm Washer and Top Hat (8mm Head) 25 3.7 8 100 1000 DP830W-PWR Drive Pin 3.7mm x 30mm With 22mm Washer and Top Hat (8mm Head) 30 3.7 8 100 1000 Currently viewing / Home / Products / Forced Entry / Powder Actuated Accessories / 8mm Drive Pin Washered With Top Hat