Galvanised Chisel Point Studs Categories Mechanical Anchoring High Load Anchors Blue-Tip 2 SCREW-BOLT™ Hangermate™ Threaded Rod Hangers Blue -Tip SCREW-BOLT™ Drop-In / Wedge Anchors Tapper+™ Concrete Screws Cast In Place Anchors (CIP) EZY Reach Hollow Core Anchors Tie Down Anchors Suspension Anchors Sleeve anchors Nylon Anchoring / Plugs Vertigo™ Threaded Rod Hangers WALL-DOG™ / Universal Anchors Light Duty / Cavity Anchors Light Duty / Plastic Plug Anchors Nylon Nail-In Anchors Masonry Nails Packers - Shims Adhesive Anchoring Injection Systems Capsules Expanding Foams & Sealant Dispensing Guns Flat Cut Studs Chisel Point Studs Cleaning / Installation Equipment Internally Threaded Sleeves Sieves Forced Entry Powder Actuated Fastening Tools Powder Actuated Pins and Charges Powder Actuated Accessories Trak-It® Gas Operated Fastening Tools Trak-It® Gas Operated Pins and Fuel Cells Trak-It® Gas Operated Accessories Screw Solutions Collated Screws Powers PowerSeal™ Cyclonic Screws Decking Screws FLAT TOPS™ Stitching Screws Hex Head Metal Self Drilling Screws Powers Zip-It Roofing and Cladding Screws Roofing Screws Metal Self Drilling Screws ONE-SHOT® Polycarbonate Roofing Screws SFS Irius® Drive - Tamper Resistant Screws Shed / Steel Framing Screws BI-METAL Stainless Steel T17 Bugle Batten Screws Hex Head T17 Self Drilling Timber Screws T17 Self Drilling Timber Screws Needle Point - Timber / Light Gauge Steel Chipboard Screws Smart-Bit® Countersinking Tools Painted Screws MURO Rivet Solutions Truss Head / 73 Rivets Countersunk / 72 Rivets Rivet Tools Power Tool Accessories Concrete Drilling Concrete Grinding Cups Diamond Blades Powers Galvanised Chisel Point Studs Powers Chisel point studs are made from quality 5.8 Grade carbon steel. Suitable for use with Powers SC-PRO capsules or any adhesive injection system. Features Quality 5.8 Grade carbon steel HDG (Hot Dipped Galvanised) Complies with AS 1214-1983 Chisel Point releases trapped air Depth set mark for accurate embedment depth External hex for stability when driving the stud in glass capsule Suitable for use with Powers SC-PRO capsules or any adhesive injection system Tags: Adhesives , Studs , Chisel-Point , Galvanised Part No. Description Minimum Embedment Depth (mm) Hole Diameter (mm) Maximum Fixture Thickness (mm) Rod Diameter Box Qty Carton Qty STM8110G-PWR Chisel Point Stud M8 x 110mm 5.8 Grade Galvanised 80 10 17 M8 10 200 STM10130G-PWR Chisel Point Stud M10 x 130mm 5.8 Grade Galvanised 90 12 28 M10 10 200 STM12160G-PWR Chisel Point Stud M12 x 160mm 5.8 Grade Galvanised 110 14 36 M12 10 10 STM16190G-PWR Chisel Point Stud M16 x 190mm 5.8 Grade Galvanised 125 18 42 M16 10 50 STM20260G-PWR Chisel Point Stud M20 x 260mm 5.8 Grade Galvanised 170 24 72 M20 5 25 STM24300G-PWR Chisel Point Stud M24 x 300mm 5.8 Grade Galvanised 210 28 66 M24 5 20 Currently viewing / Home / Products / Adhesive Anchoring / Chisel Point Studs / Galvanised Chisel Point Studs